Analysis and calibration of absorptive images of Bose-Einstein condensate at non-zero temperatures

We describe the method allowing quantitative interpretation of absorptive images of mixtures of BEC and thermal atoms which reduces possible systematic errors associated with evaluation of the contribution of each fraction. By using known temperature dependence of the BEC fraction, the analysis allows precise calibration of the fitting results. The developed method is verified in two different measurements and compares well with theoretical calculations and with measurements performed by another group.Comment: 17 pages, 8 figure

Epitaxial Ferromagnetic Nanoislands of Cubic GdN in Hexagonal GaN

Periodic structures of GdN particles encapsulated in a single crystalline GaN matrix were prepared by plasma assisted molecular beam epitaxy. High resolution X-ray diffractometery shows that GdN islands, with rock salt structure are epitaxially oriented to the wurtzite GaN matrix. Scanning transmission electron microscopy combined with in-situ reflection high energy electron diffraction allows for the study of island formation dynamics, which occurs after 1.2 monolayers of GdN coverage. Magnetometry reveals two ferromagnetic phases, one due to GdN particles with Curie temperature of 70K and a second, anomalous room temperature phase.Comment: 4 pages, 3 figure

Fabrication and structural characterization of highly ordered sub-100-nm planar magnetic nanodot arrays over 1 cm2 coverage area

Porous alumina masks are fabricated by anodization of aluminum films grown on both semiconducting and insulating substrates. For these self-assembled alumina masks, pore diameters and periodicities within the ranges of 10–130 and 20–200nm, respectively, can be controlled by varying anodization conditions. 20nm periodicities correspond to pore densities in excess of 1012 per square inch, close to the holy grail of media with 1Tbit∕in.2 density. With these alumina masks, ordered sub-100-nm planar ferromagnetic nanodot arrays covering over 1cm2 were fabricated by electron beam evaporation and subsequent mask lift-off. Moreover, exchange-biased bilayer nanodots were fabricated using argon-ion milling. The average dot diameter and periodicity are tuned between 25 and 130nm and between 45 and 200nm, respectively. Quantitative analyses of scanning electron microscopy (SEM) images of pore and dot arrays show a high degree of hexagonal ordering and narrow size distributions. The dot periodicity obtained from grazi..

Exchange biasing of single-domain Ni nanoparticles spontaneously grown in an antiferromagnetic MnO matrix

Exchange biased composites of ferromagnetic single-domain Ni nanoparticles embedded within large grains of MnO have been prepared by reduction of Ni$_x$Mn$_{1-x}$O$_4$ phases in flowing hydrogen. The Ni precipitates are 15-30 nm in extent, and the majority are completely encased within the MnO matrix. The manner in which the Ni nanoparticles are spontaneously formed imparts a high ferromagnetic- antiferromagnetic interface/volume ratio, which results in substantial exchange bias effects. Exchange bias fields of up to 100 Oe are observed, in cases where the starting Ni content $x$ in the precursor Ni$_x$Mn$_{1-x}$O$_4$ phase is small. For particles of approximately the same size, the exchange bias leads to significant hardening of the magnetization, with the coercive field scaling nearly linearly with the exchange bias field.Comment: 6 pages PDFLaTeX with 9 figure

Multiphase Ferrofluid Flows for Micro-Particle Focusing and Separation

Ferrofluids have demonstrated great potential for a variety of manipulations of diamagnetic (or non-magnetic) micro-particles/cells in microfluidics, including sorting, focusing, and enriching. By utilizing size dependent magnetophoresis velocity, most of the existing techniques employ single phase ferrofluids to push the particles towards the channel walls. In this work, we demonstrate a novel strategy for focusing and separating diamagnetic micro-particles by using the laminar fluid interface of two co-flowing fluids—a ferrofluid and a non-magnetic fluid. Next to the microfluidic channel, microscale magnets are fabricated to generate strong localized magnetic field gradients and forces. Due to the magnetic force, diamagnetic particles suspended in the ferrofluid phase migrate across the ferrofluid stream at the size-dependent velocities. Because of the low Reynolds number and high Péclet number associated with the flow, the fluid interface is sharp and stable. When the micro-particles migrate to the interface, they are accumulated near the interface, resulting in effective focusing and separation of particles. We investigated several factors that affect the focusing and separation efficiency, including susceptibility of the ferrofluid, distance between the microfluidic channel and microscale magnet, and width of the microfluidic channel. This concept can be extended to multiple fluid interfaces. For example, a complete separation of micro-particles was demonstrated by using a three-stream multiphase flow configuration

Drift versus selection as drivers of phenotypic divergence at small spatial scales: The case of Belgjarskógur threespine stickleback

Divergence in phenotypic traits is facilitated by a combination of natural selection, phenotypic plasticity, gene flow, and genetic drift, whereby the role of drift is expected to be particularly important in small and isolated populations. Separating the components of phenotypic divergence is notoriously difficult, particularly for multivariate phenotypes. Here, we assessed phenotypic divergence of threespine stickleback (Gasterosteus aculeatus) across 19 semi‐interconnected ponds within a small geographic region (~7.5 km2) using comparisons of multivariate phenotypic divergence (PST), neutral genetic (FST), and environmental (EST) variation. We found phenotypic divergence across the ponds in a suite of functionally relevant phenotypic traits, including feeding, defense, and swimming traits, and body shape (geometric morphometric). Comparisons of PSTs with FSTs suggest that phenotypic divergence is predominantly driven by neutral processes or stabilizing selection, whereas phenotypic divergence in defensive traits is in accordance with divergent selection. Comparisons of population pairwise PSTs with ESTs suggest that phenotypic divergence in swimming traits is correlated with prey availability, whereas there were no clear associations between phenotypic divergence and environmental difference in the other phenotypic groups. Overall, our results suggest that phenotypic divergence of these small populations at small geographic scales is largely driven by neutral processes (gene flow, drift), although environmental determinants (natural selection or phenotypic plasticity) may play a role.ISSN:2045-775

Male Competition Reverses Female Preference For Male Chemical Cues

Females must choose among potential mates with different phenotypes in a variety of social contexts. Many male traits are inherent and unchanging, but others are labile to social context. Competition, for example, can cause physiological changes that reflect recent wins and losses that fluctuate throughout time. We may expect females to respond differently to males depending on the outcome of their most recent fight. In Bolitotherus cornutus (forked fungus beetles), males compete for access to females, but copulation requires female cooperation. In this study, we use behavioral trials to determine whether females use chemical cues to differentiate between males and whether the outcome of recent male competition alters female preference. We measured female association time with chemical cues of two size‐matched males both before and after male–male competition. Females in our study preferred to associate with future losers before males interacted, but changed their preference for realized winners following male competitive interactions. Our study provides the first evidence of change in female preference based solely on the outcome of male–male competition

Visualization and measurement of the cell-free layer (CFL) in a microchannel network

In the past years, in vitro blood studies have revealed several significant hemodynamic phenomena that have played a key role in recent developments of biomedical microdevices for cells separation, sorting and analysis. However, the blood flow phenomena happening in complex geometries, such as microchannel networks, have not been fully understood. Thus, it is important to investigate in detail the blood flow behavior occurring at microchannel networks. In the present study, by using a high-speed video microscopy system, we have used two working fluids with different haematocrit (1% Hct and 15% Hct) and we have investigated the cell-free layer (CFL) in a microchannel network composed by asymmetric bifurcations. By using the Z Project method from the image analysis software ImageJ, it was possible to conclude that the successive bifurcations and confluences influence the formation of the CFL not only along the upper and lower wall of the microchannel but also at the region immediately downstream of the confluence apex.The authors acknowledge the financial support provided by the project POCI-01-0145 FEDER-016861 (with associated reference PTDC/QEQ-FTT/4287/2014), UID/EMS/00532/2013 and UID/CEC/00319/2013 funded by FCT (Foundation for Science and Technology), through national funds (PIDDAC), and FEDER through COMPETE2020 - Programa Operacional Competitividade e Internacionalização (POCI). D. Bento acknowledges the PhD scholarship SFRH/BD/91192/2012 granted by FCT. The authors also acknowledge the financial support provided by the project Nos. UID/EMS/00532/2013 and UID/EMS/04077/2013 and the project Nos. UID/EMS/00532/2013, UID/EMS/04077/2013, POCI-01-0145-FEDER-007043, UID/CEC/00319/2013info:eu-repo/semantics/publishedVersio

A simple device for multiplex ELISA made from melt-extruded plastic microcapillary film

We present a simple device for multiplex quantitative enzyme-linked immunosorbant assays (ELISA) made from a novel melt-extruded microcapillary film (MCF) containing a parallel array of 200µm capillaries along its length. To make ELISA devices different protein antigens or antibodies were immobilised inside individual microcapillaries within long reels of MCF extruded from fluorinated ethylene propylene (FEP). Short pieces of coated film were cut and interfaced with a pipette, allowing sequential uptake of samples and detection solutions into all capillaries from a reagent well. As well as being simple to produce, these FEP MCF devices have excellent light transmittance allowing direct optical interrogation of the capillaries for simple signal quantification. Proof of concept experiments demonstrate both quantitative and multiplex assays in FEP MCF devices using a standard direct ELISA procedure and read using a flatbed scanner. This new multiplex immunoassay platform should find applications ranging from lab detection to point-of-care and field diagnostics